This consultation was open from:
January 24, 2020
to February 23, 2020
Decision summary
Permit PR-20-000016 Issued. The exploration permit is valid for 3 years from the date of issue.
Location details
Site location details
Townships of Rathbun and Scadding.
These activities are located approximately 38 kilometers Northeast of the City of Sudbury, Ontario.
To view where the claims are on a map please go to Mining Lands Administration System Click on “I want to…” and select “Find a claim” to search by the following claim numbers:
Claim Numbers: 500889, 500890, 500891, 500892, 500893, 500894, 500895, 500896, 500897, 500898, 500899, 500900, 500901, 522793, 522794, 522795, 522796, 522797, 522798, 522799, 522800, 522801
Site location map
The location pin reflects the approximate area where environmental activity is taking place.
View this location on a map opens link in a new windowProponent(s)
Mark Hall
580 Kantola Road
Lively,
ON
P3Y 1H8
Canada
Decision details
The Exploration Permit was issued once all Aboriginal communities and the public had the opportunity to provide comment or raise their concerns. The accepted Exploration Permit is valid for a period of 3 years.
Effects of consultation
No comments were received resulting in no impact on the decision whether or not to proceed with this proposal.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
933 Ramsay Lake Road
Floor B6
Sudbury,
ON
P3E 6B5
Canada
How to Appeal
Appeals are not allowed
This instrument type cannot be appealed. Learn more about our consultation process.
Connect with us
Original proposal
Proposal details
Mark Hall has submitted an application to the ministry as required under the Mining Act for prescribed early exploration activities
The activities that this permit would allow Mark Hall to carry out are as follows:
Plan Activities:
- geophysical Survey Requiring Generator Type
- mechanized Stripping (less than 100 squared metres in 200 metre radius)
- mechanized Drilling (Assembled Weight less than, or equal to, 150 kilograms)
- pitting and Trenching (greater than one cubic metre and less than three cubic metres in 200 metre radius)
- line cutting (less than one and one-half metres in width)
Permit Activities:
- mechanized Drilling (Assembled Weight greater than 150 kilograms)
- mechanized Stripping (Greater than 100 metres squared in 200 metre radius)
- pitting and Trenching of Bedrock (Greater than three metres cubed in 200 metres radius)
Non-Prescribed Activities:
- ground Geophysical Surveys without a generator
- trails
- airborne Geophysical Survey
An Exploration Permit does not relieve the proponent from compliance with any other requirements that are set out under the Mining Act or any other Act. Further all activities included in the Exploration Permit proposal must be carried out in compliance with Ontario Regulation 308/12 and the Provincial Standards for Early Exploration.
The Exploration Permit duration will be up to 3 years with the possibility of one renewal for up to 3 years.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
933 Ramsay Lake Road
Floor B6
Sudbury,
ON
P3E 6B5
Canada
Comment
Commenting is now closed.
This consultation was open from January 24, 2020
to February 23, 2020
Comments received
Through the registry
0By email
0By mail
0