Update Announcement
This notice was updated on February 13, 2023, to advise the public that there has been no change to the status of the proposal and it is still being considered. No additional opportunity for comment is being provided for at this time.
This consultation was open from:
March 7, 2019
to April 22, 2019
Proposal summary
Big Island Quarries Inc. has applied for a Class A licence (Category 2 – Quarry Below Water) to excavate aggregate from a quarry of 10 hectares in size with an extraction area of 4.9 hectares. This application is for the establishment of a new quarry. The maximum annual tonnage applied for is 40,000 tonnes.
Location details
Site location details
North Part Lot 10, Concession 24, Geographic Township of Amabel
Town of South Bruce Peninsula, Bruce County
The site is located 6 kilometers northwest of Wiarton on Quarry Road.
Site location map
The location pin reflects the approximate area where environmental activity is taking place.
View this location on a map opens link in a new windowProponent(s)
Big Island Quarries Inc.
141 Quarry Road
Wiarton,
ON
N0H2T0
Canada
Proposal details
Proposal updates
This notice was updated on March 31, 2021 to advise the public that there has been no change to the status of the proposal and it is still being considered. No additional opportunity for comment is being provided for at this time.
Other information
The extraction of aggregate from a pit or quarry on private land designated by regulation, in the Province of Ontario, requires the issuance of a licence. The Aggregate Resources of Ontario Provincial Standards Version 1 (Provincial Standards) sets out the application process and requirements.
For each new licence, the applicant must provide information (site plan, summary statement, technical reports) with respect to the existing features, operation and rehabilitation of the site to demonstrate that the proposed operation will minimize adverse impact on the environment. This information is prepared in accordance with the category being applied for under the Provincial Standards.
For this proposal, the following are available for viewing at the Ministry of Natural Resources and Forestry office listed below:
- Site plan
- Summary Statement
- Natural Environment (Level 1 + 2)
- Hydrogeological (Level 1)
- Cultural Heritage Resources (Stage 1 +2)
- Noise Assessment
- Blast Design
The Site Plan addresses existing features of the pit and/or quarry area (existing natural features and land use on and surrounding the site within 120 meters); the proposed operation (shape, dimensions, area and depth to be excavated, method of extraction); and progressive and final rehabilitation.
The Summary Statement includes information on one or more of the following considerations: land use planning, agricultural classification, quality and quantity of aggregate, haul routes, truck traffic and entrance permits, progressive and final rehabilitation, surface water, and elevation of the established groundwater table.
The Natural Environment report determines the presence of significant natural heritage features/areas and fish habitat and ensures that any necessary preventative, mitigative or remedial measures are undertaken for their protection. A Level 1 report identifies if the features are on-site or within 120 meters of the site. If features are identified, then an impact assessment (Natural Environment Level 2 report) is prepared to determine any negative impacts on the natural features or ecological functions, and any proposed preventative, mitigative or remedial measures.
A Hydrogeological Level 1 report is a preliminary evaluation to determine the final extraction depth relative to the established groundwater table(s) and the potential for adverse effects to groundwater and surface water resources and their uses. If the Level 1 report identifies a potential adverse effect resulting from the operation, then an impact assessment (Level 2 report) is required to determine the significance of the effect and the feasibility of mitigation.
The purpose of a Cultural Heritage Resources report is to ensure that significant archaeological resources are identified, assessed for their significance, and protected (preserved or collected).
A Noise Assessment report is prepared if extraction and/or processing facilities are within 150 meters (for pit applications) of a sensitive receptor defined by the Provincial Standards. The report is required to determine whether provincial guidelines can be satisfied.
A Blast Design report is prepared if a sensitive receptor, defined by the Provincial Standards, is based within 500 metres of the limit of extraction for a quarry application. The report is required to determine whether provincial guidelines can be satisfied.
Comments received through the Environmental Registry should not be construed as an objection under the Aggregate Resources Act in accordance with section 4.0 – Notification and Consultation Standards of the Provincial Standards 1.0 under the Aggregate Resources Act. To be considered as a formal objector, individuals need to contact the Ministry of Natural Resources and Forestry person specified on this notice to determine how to submit an objection.
Supporting materials
View materials in person
Some supporting materials may not be available online. If this is the case, you can request to view the materials in person.
Get in touch with the office listed below to find out if materials are available.
300 Water Street, 4th Floor, South tower
Peterborough,
ON
K9J 3C7
Canada
Connect with us
Contact
Jason McLay
300 Water Street, 4th Floor, South tower
Peterborough,
ON
K9J 3C7
Canada
Comment
Commenting is now closed.
The comment period was from March 7, 2019
to April 22, 2019